Index >> Business >> Math & Scientific Tools >> QMSys Tolerances and Fits
Report SpywareQMSys Tolerances and Fits 5.4
Software Description:
QMSys Tolerances and Fits - Software for calculation of tolerances and fits acc. to ISO, DIN, ANSI, BS
The software QMSys Tolerances & Fits is an engineering program, which saves time and prevents human errors in determining nominal and limit values of machine parts. It can be used to choose a fit and determine tolerances and deviations of machine parts according to the following international and national standards:
- ISO 286, EN 20286, ANSI B4.2, GOST 25346 for nominal dimensions up to 3150mm
- DIN 7172, GOST 25348 for nominal dimensions over 3150mm up to 10000mm
- ANSI B4.1 for nominal dimensions up to 200 inch
- ISO 2768-1 for nominal dimensions without individual tolerance indications up to 3150mm
Using the QMSys Tolerances & Fits software the following tasks can be solved:
- Selection of suitable sizes from the preferred number series R5 to R80 according to ISO 3, ANSI Z17.1
- Selection of suitable fits according to ISO 1829, ISO 286, DIN 7154, DIN 7155, DIN 7157 or ANSI B4.1
- Design of a ISO fit according to ISO 286 for given clearance or interference respectively
- Determination of dimensional tolerances and deviations of machine parts
- Calculation of bilateral symmetrical tolerances for CNC-programs
- Determination of non-prescribed limit deviations according to ISO 2768.
The fit design is processed automatically and after its completion, the calculation provides the user with a set of fits whose parameters meet the entered requirements.
Key Benefits:
- Minimization of engineering time required to specify tolerances, fits and plane gauges
- The software promotes specification of standard hole and shaft sizes, tolerances and fits to help lower operating cost
- Calculation reports in TXT, RTF, XML, XLS or HTML format
- Information is provided in both inches and millimetres
- Multi-language flexible and user-friendly interface
Limitations: 30 Days Trial; only nom. sizes 8-10mm
The software QMSys Tolerances & Fits is an engineering program, which saves time and prevents human errors in determining nominal and limit values of machine parts. It can be used to choose a fit and determine tolerances and deviations of machine parts according to the following international and national standards:
- ISO 286, EN 20286, ANSI B4.2, GOST 25346 for nominal dimensions up to 3150mm
- DIN 7172, GOST 25348 for nominal dimensions over 3150mm up to 10000mm
- ANSI B4.1 for nominal dimensions up to 200 inch
- ISO 2768-1 for nominal dimensions without individual tolerance indications up to 3150mm
Using the QMSys Tolerances & Fits software the following tasks can be solved:
- Selection of suitable sizes from the preferred number series R5 to R80 according to ISO 3, ANSI Z17.1
- Selection of suitable fits according to ISO 1829, ISO 286, DIN 7154, DIN 7155, DIN 7157 or ANSI B4.1
- Design of a ISO fit according to ISO 286 for given clearance or interference respectively
- Determination of dimensional tolerances and deviations of machine parts
- Calculation of bilateral symmetrical tolerances for CNC-programs
- Determination of non-prescribed limit deviations according to ISO 2768.
The fit design is processed automatically and after its completion, the calculation provides the user with a set of fits whose parameters meet the entered requirements.
Key Benefits:
- Minimization of engineering time required to specify tolerances, fits and plane gauges
- The software promotes specification of standard hole and shaft sizes, tolerances and fits to help lower operating cost
- Calculation reports in TXT, RTF, XML, XLS or HTML format
- Information is provided in both inches and millimetres
- Multi-language flexible and user-friendly interface
Limitations: 30 Days Trial; only nom. sizes 8-10mm
100% Clean:
QMSys Tolerances and Fits 5.4 is 100% clean
This download (qmsys_tolerances_and_fits.exe) was tested thoroughly and was found 100% clean. Click "Report Spyware" link on the top if you found this software contains any form of malware, including but not limited to: spyware, viruses, trojans and backdoors.
This download (qmsys_tolerances_and_fits.exe) was tested thoroughly and was found 100% clean. Click "Report Spyware" link on the top if you found this software contains any form of malware, including but not limited to: spyware, viruses, trojans and backdoors.
Related Software:
- QMSys Tolerances & Gauges 5.4 - Software for calculating tolerances, fits and gauges acc. to ISO, DIN, ANSI, BS
- QMSys Threads 5.10 - Software for calculation of external and internal thread
- QMSys Threads, Tools and Gauges 5.10 - Software for calculation of thread and plain gauges
- QMSys GUM Standard 4.9 - Software for measurement uncertainty and calibration
- QMSys GUM Professional 4.9 - Software for uncertainty of measurements and calibrations.
- QMSys GUM Educational 4.7 - Software for the uncertainty of measurements and calibration.
- ESBStats - Statistical Analysis Software 2.2.0 - Easy to use Statistical Analysis and Inference for Windows
- Regression Analysis and Forecasting 3.0 - Producing statistically sound value driver identification for forecasting data.
- Loan Tracker Software 5 - Amortization, Loan Tracker Software
- Function Grapher For Academic 3.9.1 - Graph maker to create 2d, 2.5d, 3D and 4d function graphs and animations.
top 10 most downloaded
recommended software
-
- A VIP Organizer
- VIP Organizer is a time and task management software which uses To Do List method to help you get through more work spending less time. It increases y...
-
- Salon Calendar
- Salon Calendar is a software tool designed specially for hair salons, beauty, manicure or aesthetic shops, tanning salons, fitness studios, wedding sa...