Index >> Graphic Apps >> CAD >> DipTrace
Report SpywareDipTrace 3.1
Click to enlarge screenshot
Software Description:
DipTrace - Full-featured PCB design software with easy-to-learn user interface
DipTrace is an advanced PCB design software application that consists of 4 modules: PCB Layout with shape-based autorouter, high-speed/differential signal routing tools, and 3D PCB Preview/Export, Schematic Capture, and Component/Pattern Editors that allow you to design custom component/footprint libraries. Besides being very simple to learn, this software provides wide engineering capabilities with intuitive user interface. Schematic capture works with hierarchical and multi-sheet schematics. Instant converting to PCB, renewing a circuit board from schematic, and comparing them keeps an entire PCB project in sync on all design stages. DipTrace provides manual and automatic placement tools and is capable of routing single- and multilayer circuit boards (including PCBs with jumper wires) with a full control over the layer stackup. The software also supports external autorouters. Smart manual routing tools allow the users to finalize complex high-density designs with differential pairs and high-speed data buses and get a working prototype on time. An accurate shape-based copper pour system with different possible fill types, thermals, and priority levels is available. Electrical Rule Check (ERC), Design Rule Check (DRC and Real-Time DRC), and Net Connectivity Check ensure the error-free working environment. ERC checks connections in the schematic by pin type, short circuit, etc. DRC verifies sizes and clearances between the objects on the circuit board, differential pair phase tolerances, and length-matching rules according to custom constraints. Net Connectivity checks if all nets are properly connected. DipTrace is highly flexible and allows for exchanging schematics, layouts, and libraries with other EDA and CAD packages. DipTrace Schematic Capture and PCB Layout also support popular netlist formats and SPICE. Output formats: DXF, Gerber, ODB++, Gerber X2, IPC-D-356A, N/C Drill, and G-code. Standard libraries include 140.000+ components and 7,500 3D models.
What's New: - Trace length matching tools and DRC rules - Layer Stackup table - Improved Phase Tune tool - New hotkeys, UI polishing, and speed optimizations - 11,000+ new parts - 7500+ STEP models for 3D Preview
Limitations: 30 Days Trial
TAGS: pcb layout, electronics, schematic capture, pcb software, pcb design software
DipTrace is an advanced PCB design software application that consists of 4 modules: PCB Layout with shape-based autorouter, high-speed/differential signal routing tools, and 3D PCB Preview/Export, Schematic Capture, and Component/Pattern Editors that allow you to design custom component/footprint libraries. Besides being very simple to learn, this software provides wide engineering capabilities with intuitive user interface. Schematic capture works with hierarchical and multi-sheet schematics. Instant converting to PCB, renewing a circuit board from schematic, and comparing them keeps an entire PCB project in sync on all design stages. DipTrace provides manual and automatic placement tools and is capable of routing single- and multilayer circuit boards (including PCBs with jumper wires) with a full control over the layer stackup. The software also supports external autorouters. Smart manual routing tools allow the users to finalize complex high-density designs with differential pairs and high-speed data buses and get a working prototype on time. An accurate shape-based copper pour system with different possible fill types, thermals, and priority levels is available. Electrical Rule Check (ERC), Design Rule Check (DRC and Real-Time DRC), and Net Connectivity Check ensure the error-free working environment. ERC checks connections in the schematic by pin type, short circuit, etc. DRC verifies sizes and clearances between the objects on the circuit board, differential pair phase tolerances, and length-matching rules according to custom constraints. Net Connectivity checks if all nets are properly connected. DipTrace is highly flexible and allows for exchanging schematics, layouts, and libraries with other EDA and CAD packages. DipTrace Schematic Capture and PCB Layout also support popular netlist formats and SPICE. Output formats: DXF, Gerber, ODB++, Gerber X2, IPC-D-356A, N/C Drill, and G-code. Standard libraries include 140.000+ components and 7,500 3D models.
What's New: - Trace length matching tools and DRC rules - Layer Stackup table - Improved Phase Tune tool - New hotkeys, UI polishing, and speed optimizations - 11,000+ new parts - 7500+ STEP models for 3D Preview
Limitations: 30 Days Trial
TAGS: pcb layout, electronics, schematic capture, pcb software, pcb design software
Feature List:
- To design a schematic, simply select and place components onto your document and connect them together using the wire and bus tools. Multisheet design is supported. Then select the menu option 'Switch to Board' to convert the schematic to PCB. Layout can be updated from Schematic in a few clicks at anytime. When you create or edit design objects they are highlighted to improve your work. Step-by-step tutorial available from web-site guides you through the design process and allows to get started with ease
- DipTrace PCB software includes an advanced automatic router that is able to route single-layer and multi-layer boards. It is available with a 'rip-up and retry' algorithm. Autorouter achieves high completion rates by going back and re-routing nets to make space for connections that could not be routed on a previous pass. Intelligent manual routing tools allow you to create and edit traces by 90, 45 degree or without any limitations. Through, blind or buried vias can be used in automatic and manual routing. Unlimited board size is supported
- Powerful copper pour system can help to reduce your manufacturing costs by minimizing the amount of etching solution required. To use it, all you have to do is insert a copper area on your board in the PCB Layout program and any pad or trace inside the selected area will be automatically surrounded with a gap of the desired size. Using copper pour you can also create planes and connect them to pads and vias (different thermal types are supported)
- Schematic and PCB design modules have number of verification features that help control project accuracy on different design stages: The ERC function shows possible errors in Schematic pin connections using defined rules and allows you to correct errors step-by-step. DRC function checks the clearance between design objects, minimum size of traces, and drills. Errors are displayed graphically and you can fix them step-by-step and rerun the DRC in one click after any corrections. Net Connectivity Check verifies if all nets of PCB are electrically connected. This feature uses traces, copper pour filled area and shapes to control connectivity, then reports broken and merged nets with area details. Comparing to Schematic allows you to check if routed PCB is identical with Schematic
- Package modules allow you to exchange schematics, layouts and libraries with other EDA and CAD packages. DipTrace Schematic Capture and PCB Layout also support Accel, Allegro, Mentor, PADS, P-CAD, Protel and Tango netlist formats
- DipTrace provides support for a number of different manufacturing output formats. Using this PCB software you can produce N/C Drill files for numerically controlled (N.C.) drilling machines and RS-274X Gerber files for sending to board manufacturers. Vectorizing function allows to export true-type fonts and raster images. Also DipTrace supports DXF output
- DipTrace allows you to export edge polylines to DXF. The DXF files can be converted to G-code with Ace Converter (it's free). Before edge exporting the DRC function of pcb layout program checks the design and shows possible problems if exist
- DipTrace package includes component and pattern libraries which contain 50.000+ components from different manufacturers
- Component and Pattern Editors allow to design your own symbols and patterns. To create complete components simply connect them together using Component Editor
100% Clean:
DipTrace 3.1 is 100% cleanThis download (diptrace_en.exe) was tested thoroughly and was found 100% clean. Click "Report Spyware" link on the top if you found this software contains any form of malware, including but not limited to: spyware, viruses, trojans and backdoors.
Related Software:
- DipTrace Free 3.1 - Full-featured PCB design software with easy-to-learn user interface
- ABViewer 9.1 - CAD DWG DXF HPGL TIFF CGM SVG WMF STEP IGES STL SAT viewer, editor and converter
- Visual Drawing Maker 1.13 - Convert CAD files into self viewing executable (*.exe) files.
- MITCalc3D for SolidWorks 1.61 - Mechanical, Industrial and Technical Calculations for SolidWorks
- AutoQ3D CAD 5.10 - Full CAD application that let you make a lot of things in 2D & 3D
- progeCAD Professional AutoCAD Clone 2011.2.0.9 - progeCAD AutoCAD DWG Clone, 1/10th the cost, no learning curve for AutoCAD users
- DWF to DWG Converter 2007 2010 - Instantly convert DWF files to AutoCAD DWG and DXF files.
- AutoDWG Attribute Extractor 2.8 - AutoDWG Attribute Extractor, extract attribute information
- Maze Creator PRO 1.70 - Create random customized mazes with solution; add pictures, text, change shape
- ACAD DWG Viewer Pro 3 - DWGSee, a lite and fast DWG/DXF/DWF Viewer, batch print DWG/DXF/DWF files.
top 10 most downloaded
recommended software
-
- 1AVCenter
- With 1AVCenter you can record your entire screen or part of it directly to AVI or WMV, capture screenshots in JPG, share your screen over the internet...
-
- IconEdit2
- Create and edit icon files for Windows, iPhone, iPad, Apple Watch, and Android with professional yet easy-to-use Icon Editor. IconEdit2 has full suppo...
